 The unit is fitted with a Mixcall III Thermostatic Blending Valve, to control the hot water temperature, and prevent scalding. |
|
| 11 Users Instructions |
| The Heat Bank Thermal Store Unit should be set up by the installer according to the instructions given in the Installation and Commissioning Instructions. |
|
| Please not that under certain circumstances, increasing the flow rate of water from a tap or shower may result in the water temperature dropping. Likewise, reducing the flow rate will result in the temperature increasing - the temperature will not increase above the setting of the Thermostatic Blending Valve. |
The Horstmann Electronic 7 Immersion Heater Controller  
controls the times
when water is heated. When set to timed, the unit will heat up on
overnight electricity. To heat the cylinder up at other times, a boost
facility is provided.For copies of Instructions, please telephone Horstmann on 01225 421141. |
|